monofoilman
New User
- Joined
- Mar 13, 2019
- Messages
- 2
- Reaction score
- 1
I've just installed a new DHT module in an ACE R/C Silver Seven transmitter and bound it to a new V8FR-II receiver. The bind seems to have worked OK since the receiver LED is on solid green and according to the sparse instructions with the module and receiver, the green solid LED indicates that the receiver is bound and getting the signal from the DHT module. The problem is that there are no signals out of any of the servo signal pins, so servos don't work. I checked voltages on a scope and the +5V and GND pins are OK. Any suggestions?