Taranis X9D plus 2019 SE does not bind

[Gandalf75]

Dear All, I am desperate and I hope you can help me out.

I have purchased a Taranis X9D plus 2019 SE LBT. I have updated Taranis OTS firmware to 2.3.10 and ISRM to 2.1.0 as well.
I am still unable to bind the RX X8R Pro (LBT and firmware updated to version 2.1.0).

I have purchased two RX X8R Pro and both I am unable to bind.

Can anyone help me to fix this?

In case you need, I have attached a compressed file with the 3 firmwares that I have on the SD card and flashed on the TX and RX.

thanks a lot for your kind assitance.

 

[HENNY]

You need to flash the receivers with the same RF version firmware number. I guess you mean RX8R Pro. The most recent version is ACCST D16 v2.1.1. This receiver does not support "ACCESS" Are you sure you flashed the receiver correctly.

 

[Kilrah]

He posted somewhere else and actually has a plain X8R, not an RX8R Pro. So he flashed the wrong firmware to it.

 

[Wayne]

ahh..

 

[Gandalf75]

I indeed resolved, I was using the wrong firmware for the RX by mistake

 

[Gandalf75]

Thanks to Kilrah who patiently assisted me