Single Stick Build-using existing X10xs Express components.

[Hoqiam]

Wayne/Rafael

As I move the X10s Parts into the new SS TX Box, I am making some assumptions.

1. That I should replace the clock battery.
2. That when I do this the clock will have to be reset.
3, That after this point, the assembly will go per the assembly/instruction manual.
4. That the first power-up, the first Boot-Loader power-up, and the first operational
power-up will all go forward per the assembly/ instruction manual.

Since the X10s is an operational Ethos Radio to begin with, I do not know for sure if any
of the above is TRUE.

Tom

 

[Wayne]

It would not hurt to replace the clock battery while you have easy access. If you have a modern version of Ethos, then the clock battery should have a nice long life. Old versions could drain the battery.