Servos do not have a signal from RX

[Rischakt]

I have an XJT module in JR transmitter, with RX6R receiver. Receiver has green LED illuminated like it’s bound, but none of the servos or ESC are receiving a signal.

 

[Wayne]

Sounds like the JR is not passing the signals. Make sure the radio is not set to PCM or some other odd mode.

 

[ted]

I have an XJT module in JR transmitter, with RX6R receiver. Receiver has green LED illuminated like it’s bound, but none of the servos or ESC are receiving a signal.

Check if plugs are backwards.