Konrad
Very Strong User
It is understood that the RX8R-pro has the best hardware and software noise filters. My question is where are these in the function block diagram. I ask as I'm wondering if the input form the redundancy receicvers will be processed through these filters before going to the servo decoder? This is often thought of as front end or back end of the receiver. Front end being the RF section and the aft end being the data processing.
Or put another way, do both Rx need to be RX8R-pros to ensure that the signal from the redundant rx is clean in the noisy RF enviroment of an ignition system.
All the best,
Konrad
Or put another way, do both Rx need to be RX8R-pros to ensure that the signal from the redundant rx is clean in the noisy RF enviroment of an ignition system.
All the best,
Konrad
