Rx4R Channel Mixing

[sloperute]

I am building a Bob Hoey Turkey Vulture that uses two servos to articulate the wingtip "feathers" for roll control and a single servo for the elevator. Can the RX4R receiver paired with a Taranis QX7 mix the two aileron (feather) servos?

The first three feathers rotate independently by need adjustment together for angle of attack.

Thanks for the help.

 

[Konrad]

Sure

 

[sloperute]

Hi Konrad. " Sure" means yes that is possible? Just making sure prior to purchasing. Thanks.

 

[Konrad]

Have you done any mixing with OpenTX on your QX7? If so there is no RX limitations to the mixing. You have the need of 3 outputs and you have 4 in the RX giving you a spare for whatever (motor).

 

[sloperute]

That is what I thought. Yep, I have an G-RX6 set up with mixing on my QX7 so I get the mixing logic. Thanks for the help I suspect I just needed a little hand holding.

 

[Wayne]

This is how I like to explain the mixing capabilities in FrSky radios:
"If you can imagine it, the radio can do it."

You might say this puts the limitation on your imagination, not the radio.

If you get stuck, just ask, these odd layouts like this are fun.