R9M dual transmitter bind ?

[JeromePilot]

Hi,
is there a way (firmware ?) to bind 2 r9m Tx module to 1 receiver or to clone 1 Tx module so that 2 radio can work with 1 model (not in the same time, of course) ?
I like this possibility on UNI firmware on D16 receivers, but want to do the same with dual band transmission (2.4ghz & 900 mhz)

 

[Wayne]

I assume you want to have the dual bind feature so you can switch between 2 different transmitters as you like. Bring one or the other to the field sort of thing. Is that correct? Or are you wanting to transfer mid flight to the second transmitter?

 

[JeromePilot]

I want to have 2 transmitters (1 using mode 1 and 1 usimg mode 2) for my tug so that 2 pilots can use it with there own stick settings

 

[Wayne]

Well, a poor workaround would be to always turn on the main transmitter, and then use the trainer function to connect the second transmitter. Not pretty, but would perform the function.

 

[HENNY]

I want to have 2 transmitters (1 using mode 1 and 1 usimg mode 2) for my tug so that 2 pilots can use it with there own stick settings

If you mean two pilots but not in trainer mode, so each having a fly using their own transmitter. Yes thats possible as long as Mode-1 and Mode-2 have the same receiver / channel order. IE both have TAER or AETR. Simply in ACCESS mode register both and then wirelessly bind. When switching transmitter you need to wirelessly bind the second TX as you will have already been registered.

 

[JeromePilot]

If you mean two pilots but not in trainer mode, so each having a fly using their own transmitter. Yes thats possible as long as Mode-1 and Mode-2 have the same receiver / channel order. IE both have TAER or AETR. Simply in ACCESS mode register both and then wirelessly bind. When switching transmitter you need to wirelessly bind the second TX as you will have already been registered.

interesting solution, thk U, but one of my radio (x9e) is accst only, not access. I don't think the r9m 2019 (access) would work on it.

 

[HENNY]

interesting solution, thk U, but one of my radio (x9e) is accst only, not access. I don't think the r9m 2019 (access) would work on it.

Only possible with Access protocols, you could simple bind each transmitter as required the old fashion way.