I have found the resolution to my mixing issue to disable the f949s gyro. Wltoys f949s needs to be bound to MT99XX/ A180. Multi-module documentation for MT99XX protocol A180 shows the gyro for F949s is on channel seven. I set up a switch on that channel after setting up gyro on channel seven and all servo glitches are gone. Thanks
Aloft Forums
Welcome to Aloft Forums. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Problem solved WLToys f949s receiver issue
- Thread starter ecchewie
- Start date
Similar threads
