Hello Gentlemen and Seasons Greetings to all:
I’m stuck setting up a TD SR12 on my X18SE. When I got the receiver, I realized the configuration icons were missing on my TX, so searched online and found I needed to download.
I upgraded firmware to: 1.4.15FCC and Bootloader to 1.4.15. Then installed LUA Scripts: RF Firmware-TD-ISRM 2023-11-17 TD2.2.6 And: FW-TD-ISRM_v2.2.6 to ISRM And: FW-TDR12_TDSR12_1.0.11to Receiver
And: FrSky_STAB_RX_v2.06 to Scrips
After all of that, I found I had the three SRX icons in the system file of my X18SE.
The problem occurs when I try to calibrate the gyroscope. It works fine for the first five steps, but freezes on the sixth step with the "...SRX not legible lettering. pins left...". NOTHING HAPPENS.
I am lost and don’t know how to proceed. Now What? Please help!!!!!!!!!!
I’m stuck setting up a TD SR12 on my X18SE. When I got the receiver, I realized the configuration icons were missing on my TX, so searched online and found I needed to download.
I upgraded firmware to: 1.4.15FCC and Bootloader to 1.4.15. Then installed LUA Scripts: RF Firmware-TD-ISRM 2023-11-17 TD2.2.6 And: FW-TD-ISRM_v2.2.6 to ISRM And: FW-TDR12_TDSR12_1.0.11to Receiver
And: FrSky_STAB_RX_v2.06 to Scrips
After all of that, I found I had the three SRX icons in the system file of my X18SE.
The problem occurs when I try to calibrate the gyroscope. It works fine for the first five steps, but freezes on the sixth step with the "...SRX not legible lettering. pins left...". NOTHING HAPPENS.
I am lost and don’t know how to proceed. Now What? Please help!!!!!!!!!!
