Flaperon slow deployment

[Hookstar]

Hi all, my first post here. I have added a flaperon line to the ailerons for my 4ch Minimoa 1.4m glider using an 'Offset' to Lower both flaps 10 degrees linked to switch SA. This works nicely, but a bit too crisply. I would prefer it to smoothly lower the ailerons, however, the 'slow' up/down function does not change the up/down speed for some reason. Oddly, the 'delay' function, just next to it does work as it should. Do we know why the 'Slow' is ineffective? This is my second build, my first aileron model. I use a Taranis X9 lite. Grateful for any advice. I did a brief search here and can see the recommendation on buying the manual, also that by model three, it all starts to make sense! I do hope so . Simon

 

[HENNY]

The slow function is not intended to work with offset. Use a switch line in the mix menu and select MAX as the source then you can use weight to perform the function you want and slow up or down will work.

 

[Hookstar]

Many thanks for welcoming me here. Henny, that works perfectly, thanks very much! All systems go here, just waiting for the wind to drop!

 

[Hookstar]

Tony Ray's Minimoa 1.4m, with a little flaperon in the mix.