Flap to elevator mix help

[solarviper]

Can I please get some help with flaps to elevator mixing on the x20s runinng ethos, the manual talks about it some and I know there's a preprogram mix for it in the radio but i have been unable to get any of it working on my plane a tutorial would be great or some kind of video but unable to find either, plane is the Efite Turbo timber, every time i put flaps down to land the plane points straight up and stalls.

 

[Konrad]

You might find the answer to all your programing needs here.

Ethos Hangar home page

Tutorials and templates for Ethos

rc-soar.com

FrSky Ethos mixers reference

Describes the mixers in FrSky Ethos

rc-soar.com

 

[gnichola]

How far have you gotten and what part doesn't work? I did a quickie test and added a Flap => Ele mix, set the source to the flap switch, add curve, making a 2 point curve with one point on 0 and the other at 100. Then back at the mixer, adjust the weight to get the amount of elevator offset you want.

 

[solarviper]

Ok thanks alot I was able to get it working by the links you posted, Mikes ethos hanger, plus a ton more from there, when i used flap to elevator mix in the radio it was working but I didn't have enough weight set to see the elevator moving when the flaps go down, but all is good now, thank you all for the help!

 

[Konrad]

When I’m playing with mixes I like to use a weight of more than 50. This allows me to see what is happening. After seeing the function I want I then start to think of the actual value I need from that mix function.