ethos_1.5.12_x10.zip file needed for non-express horus x10s with the iXJT board

[RayJorg]

I bought a used X10S with the iJXT internal module (unused) running EdgeTx and several protocols I don't need, but not ACCST. I intended to do a fresh install of Ethos using the existing iXJT module, as I have quite a few early Frsky D16 V1 receivers, and I want a more modern interface (coming from a Taranis X9D). I'm not willing to update to the ISRM board and update the receivers to ACCESS because I share planes with a grandson with a QX7. But after hours of searching and readings tons of forum posts, I can't find the firmware file needed. All the info is dated, pointing to dead links or the Github repository that now only carries files for X10S Express or X10S with the ISRM ACCESS module.
Does anyone know of a verified-to-work link toa ethos_1.5.12_x10.zip file? (or slightly earlier) Or have a copy they are willing to share? Thanks in advance!

 

[HENNY]

I bought a used X10S with the iJXT internal module (unused) running EdgeTx and several protocols I don't need, but not ACCST. I intended to do a fresh install of Ethos using the existing iXJT module, as I have quite a few early Frsky D16 V1 receivers, and I want a more modern interface (coming from a Taranis X9D). I'm not willing to update to the ISRM board and update the receivers to ACCESS because I share planes with a grandson with a QX7. But after hours of searching and readings tons of forum posts, I can't find the firmware file needed. All the info is dated, pointing to dead links or the Github repository that now only carries files for X10S Express or X10S with the ISRM ACCESS module.
Does anyone know of a verified-to-work link toa ethos_1.5.12_x10.zip file? (or slightly earlier) Or have a copy they are willing to share? Thanks in advance!

You can down load these files from the github website. https://github.com/FrSkyRC/ETHOS-Feedback-Community/releases you will need to scroll back to find the files you need.

 

[Wayne]

Think FrSky also has them here:

Releases · FrSkyRC/ETHOS-Feedback-Community

Feedback & suggestions are welcomed here for ETHOS by FrSky - FrSkyRC/ETHOS-Feedback-Community

github.com

 

[RayJorg]

Thank you Henny & Wayne, but this is the path I'm already been down (checked, rechecked many times) The only files available in any of the V1.5.x Assets folders are X10-ISRM.zip or X10EXPRESS.zip; both use the ISRM rf module, not the iXJT module. I was told by someone (can't remember who) that FrSky removed ALL the iXJT related files recently. Hence, I'm looking for someones personal backup.

 

[Wayne]

I don't see any logic for them to remove files from an archive. Question is did they ever offer that version for ISRM? That I do not know.

 

[RayJorg]

If I remember correctly, they came out with the Horus X10 with Ethos (the big selling point) at least a couple of years before they came out with the V2 version of ACCST, and then ACCESS, which then pushed the change from the existing iXJT module to the new ISRM module. This is the version I'm trying to recreate, which I understand needs the earlier non-ISRM firmware. Is this correct?

 

[Chris]

Yes, you are correct.
The original X10S was made for OpenTx, or FrOs, or whatever that disaster was called... Ethos came after. The original X10S ISRM was never intended to run Ethos.
The Ethos version came a couple years later.