Aloft Forums
Welcome to Aloft Forums. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Django 2.5 Motor Question
- Thread starter Jim_T
- Start date
Tmcfarland
Strong User
I have a 3m Hollien Introduction and the pictured motor has been great. Smooth and very powerful. I’m sure Jarron will be able to set you up with a great motor / prop combo. Hope you will post pics of your build.
Attachments
This will require you to reverse the motor shaft, but it will fly the airplane fine. You should be able to get the motor leads to just clear the bell.
Motor: https://alofthobbies.com/products/emax-xa2212-kv1400-brushless-motor?_pos=2&_sid=16b0f8c66&_ss=r
ESC: https://alofthobbies.com/products/hobbywing-skywalker-20a-esc-v2?_pos=1&_sid=4e9c7d107&_ss=r
Prop: https://alofthobbies.com/products/aeronaut-cam-8x4-20x10-cm?_pos=34&_sid=5c3350490&_ss=r
Spinner: https://alofthobbies.com/products/turbo-32mm-folding-prop-spinner?_pos=2&_psq=turbo-32&_ss=e&_v=1.0
Collet: https://alofthobbies.com/products/turbo-folding-prop-spinner-collet-3mm?_pos=1&_sid=135f246cf&_ss=r
Thanks Jarron. I was actually looking at the emax 2212-KV980 and swinging a 9X6 prop, but your suggestion should give me a bit mor thrust. I'm going to wait 'till the model arrives, and take a look at how much room I have in the fuse befor ordering the rest of what I need....
