Yotaman1985
Very Strong User
Hello everybody,
Unfortunately it is time for me to part ways with this BVM Bobcat Composite. I purchased it from a friend of mine and decided to redo it but I have never finished it and have lost interest/time. I would rather someone finish it and get it flying instead of it hanging in my garage collecting dust. It has been flown a bit and shows some scuffs and chips but is a solid aircraft with no crashes.
There is a crack from a nose gear collapse but it has been repaired (see photos) and was flown many times as is. The tip of the RH vertical tail also got bent but was repaired and again, has been flown with no issues. The wing tips were scuffed up so I added some thin carbon fiber plates installed with double sided tape and sealed the edges with RTV so that they can be removed and replaced if needed.
Here is a list of the included parts;
BVM Bobcat Composite
BVM gear (Main gear cover plates included but not installed)
BVM smooth stop and retract valves
Mix of JR and Savox servos
Swiwin 80B and all accessories with about 16 hours (will verify)
Custom fuel tank setup
Custom avionics tray started with more material to make another tray if desired
AG61 steering gyro
JMP Air gauges and service ports (factory gauges and service ports included)
Spare parts lot and original manuals and drawings
This is a great beginner jet to get your waiver with or a inexpensive sport jet to add to your hanger. Would be an easy winter project to get it going, I just no longer have the time and motivation as I have another jet I fly.
Can meet in the East Bay Area, Hayward or possibly Crows Landing CA. Asking $3100 OBO
Unfortunately it is time for me to part ways with this BVM Bobcat Composite. I purchased it from a friend of mine and decided to redo it but I have never finished it and have lost interest/time. I would rather someone finish it and get it flying instead of it hanging in my garage collecting dust. It has been flown a bit and shows some scuffs and chips but is a solid aircraft with no crashes.
There is a crack from a nose gear collapse but it has been repaired (see photos) and was flown many times as is. The tip of the RH vertical tail also got bent but was repaired and again, has been flown with no issues. The wing tips were scuffed up so I added some thin carbon fiber plates installed with double sided tape and sealed the edges with RTV so that they can be removed and replaced if needed.
Here is a list of the included parts;
BVM Bobcat Composite
BVM gear (Main gear cover plates included but not installed)
BVM smooth stop and retract valves
Mix of JR and Savox servos
Swiwin 80B and all accessories with about 16 hours (will verify)
Custom fuel tank setup
Custom avionics tray started with more material to make another tray if desired
AG61 steering gyro
JMP Air gauges and service ports (factory gauges and service ports included)
Spare parts lot and original manuals and drawings
This is a great beginner jet to get your waiver with or a inexpensive sport jet to add to your hanger. Would be an easy winter project to get it going, I just no longer have the time and motivation as I have another jet I fly.
Can meet in the East Bay Area, Hayward or possibly Crows Landing CA. Asking $3100 OBO
