What's new
Aloft Forums

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Analog Voltage sensor for FrSky Receivers

DougSimmons

New User
Joined
Mar 8, 2018
Messages
18
Reaction score
2
Location
Greenwich, CT
Hmm.. Looks like the answer is no.

My TX, now bound (binded?) to the G-XR8, discovers the sensor, using the same multipliers I use for 3S and 4S that work fine when plugged into my X8R. When substituting the G-XR8, it discovers the sensor and data streams in, but it is not only a few volts short, it is fluctuating rapidly by about 2.5V (so no point in dialing up the multiplier to try to calibrate it). I plugged the sensor back into the X8R, switched models, the right readings resumed with the usual stability.

But maybe it needs to simmer down and adjust to this new rx relationship for a while, this thing has a mind of its own sometimes. Damn, I was hoping to give you a yes. My favorite sensor...

Though I did fry a few PWMs on this G-XR8, maybe it has post-traumatic stress.
 
Top