Hello Everyone.
we have some 3D Printed Seagulls kits available (Glider Version)
TECHNICAL SPECIFICATIONS
Material : PLA, LW PLA AND TPU
WINGSPAN 1500 mm/59 inches
LENGHT 530 mm/20.8 inches
FLIGHT WEIGHT 500 ~ 600 grams
We don't have it opened in the website for everyone just yet. Because Our manufacturer is limited. But you can purchase trough this link once we have some units available
alofthobbies.com
Included.
*Seagull Kit
*Carbon Fiber parts
you can download the manual for building >here<
Price is $120.00 Plus Shipping
we're selling for this price since we need to pay royalties to the designer ( Rene)
and many hours printing, about 50 hours printing,
I spent many hours also refining the slicing to get an excellent print result, I bet you guys will love it!
If You Are interested on it let me know. on this thread and by private message ill follow up with your order.
You Also Need some extra things to complete the build.
3x 9 grams servos i can recomend this one Emax ES09MD >HERE<, or this cheaper one Emax ES09A >HERE<
4x Neodym Super Magnets 5x5x5 mm
1 x Insta-Cure+ Medium >HERE<
2x 10" Servo Extensions >HERE<
4x Magnets for the battery cover
4 channel Receiver FrSky RX4R >HERE<
Battery Dualsky Lipo Receiver Pack 800mAh 3.7V >HERE<
We tested this model at our big SUNSET Camp n' Fly event,
and I can say for sure. this is a very fun model to fly
Also has characteristics of an intermediate model but also being able to fly slowly. I had a lot of fun with.
we have some 3D Printed Seagulls kits available (Glider Version)
TECHNICAL SPECIFICATIONS
Material : PLA, LW PLA AND TPU
WINGSPAN 1500 mm/59 inches
LENGHT 530 mm/20.8 inches
FLIGHT WEIGHT 500 ~ 600 grams
We don't have it opened in the website for everyone just yet. Because Our manufacturer is limited. But you can purchase trough this link once we have some units available
3D Printed Seagull Glider
Really fun.TECHNICAL SPECIFICATIONSMaterial : PLA, LW PLA AND TPU WINGSPAN 1500 mm/59 inches LENGHT 530 mm/20.8 inches
Included.
*Seagull Kit
*Carbon Fiber parts
you can download the manual for building >here<
Price is $120.00 Plus Shipping
we're selling for this price since we need to pay royalties to the designer ( Rene)
and many hours printing, about 50 hours printing,
I spent many hours also refining the slicing to get an excellent print result, I bet you guys will love it!
If You Are interested on it let me know. on this thread and by private message ill follow up with your order.
You Also Need some extra things to complete the build.
3x 9 grams servos i can recomend this one Emax ES09MD >HERE<, or this cheaper one Emax ES09A >HERE<
4x Neodym Super Magnets 5x5x5 mm
1 x Insta-Cure+ Medium >HERE<
2x 10" Servo Extensions >HERE<
4x Magnets for the battery cover
4 channel Receiver FrSky RX4R >HERE<
Battery Dualsky Lipo Receiver Pack 800mAh 3.7V >HERE<
We tested this model at our big SUNSET Camp n' Fly event,
and I can say for sure. this is a very fun model to fly
Also has characteristics of an intermediate model but also being able to fly slowly. I had a lot of fun with.
Last edited:
