opentx

Trouble translating OTX logic switch language to Ethos format. The image reflects my OTX two-factor ignition process for my gassers. I am trying to do the same. In this case I want to use SH and SI (on the back) both held for 2 seconds to turn the ignition module on. This is what I have now...

Hi all, my first post here. I have added a flaperon line to the ailerons for my 4ch Minimoa 1.4m glider using an 'Offset' to Lower both flaps 10 degrees linked to switch SA. This works nicely, but a bit too crisply. I would prefer it to smoothly lower the ailerons, however, the 'slow' up/down...

So I recently switched from a Taranis X9D+ with an older version of OpenTX 2.0.9 !!! to a new X9D 2019 loaded with the latest OpenTX software 2.3.14, I also have an XJT module plugged in the back so I can bind with some of my older receiver, however some of the future that I really enjoyed using...

I have what I believe to be an early X9D+ (purchased in 2015 from Hobby King). I've never been able to get an external module to work. First with origional FW and later with OpenTX. I always chalked it up to crappy modules (purchased from BangGood etc.), but after having issues with 3...

I recently tried to upgrade the firmware on my Archer SR6 RX from 2.1.6 to 2.1.9. After upgrading, my Taranis X9 Lite S (OpenTX 2.3.12) experienced constant disconnect events. I was able to back down to 2.1.6 and the issue went away. Is it possible that the new telemetry (Acc X/Y/Z sensor and...

I'm. very new to OpenTX but not to embedded development I've even used Lua a bit in other projects. I'm excited about what I'd like to do with my transmitter but I'm also not sure if what I'd like to do is possible. Here I'll explain what I'd really like. I have a 3 position switch that starts...

What drives you to get another radio? With a new TX program, Ethos on the cusp on entering the market place I've been looking over what has motivated me to get a new radio. Here I will spell out my journey down the path of the computer radio. I'd like to learn what drives you to get a new...

One of life's lesson I learned from Watergate was; follow the money. When I bought my X9D+ 2014 there was a note on the sales page to donate some money to OpenTX as it was an open source project and not contracted with FrSky. I was looking to upgrade my OpenTX OS. So I thought it would be...

Hello, I'm hoping someone knows a short cut to change the tail configuration of an existing plane. Radio is X10S, running OpenTx 2.2.4., receiver is Frsky S6X w/gyro on. I copied a glider with T tail configuration that was completely setup and flying. I copied it to a new glider, but this new...