Aloft Forums
Welcome to Aloft Forums. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
gimbal
-
D
Taranis x9d, can't calibrate - sticks don't go to endpoints?
Here's a short video - but my rudder and aileron movements do not go to the endpoints and/or behave erratically. I tried the calibration but essentially they behave the same way in the calibration too. I recently had to re-solder a wire on the right gimbal that had disconnected, and now it...- degallierd
- Thread
- calibration gimbal taranis x9d
- Replies: 19
- Forum: OpenTX
-
3 axis stick for X10 or X10S?
Thought I would share an interesting question here on the forum so others may learn from it. Can you use the FrSky 3 axis stick end with the X10 radios? https://alofthobbies.com/third-axis-stick-end.html The current design of the 3 Axis stick end is a screw in application. Currently the only...