frsky

Hi, is there a way (firmware ?) to bind 2 r9m Tx module to 1 receiver or to clone 1 Tx module so that 2 radio can work with 1 model (not in the same time, of course) ? I like this possibility on UNI firmware on D16 receivers, but want to do the same with dual band transmission (2.4ghz & 900 mhz)

After upgrading to latest FW with Ethos suite, I accidentally pulled out the usb cable before I had "dismanteled" it in windows. That resulted in the radio will not turn on in any way. There is no light in the power button. I even discovered, after a couple of days, that the battery was also...

Actually, I have 2 questions, both related to the stabilized Rx's. I think the 1st question is easy to answer, the 2nd maybe not. Here goes... (OpenTX-X9D-2019 2.3.15, Archer-X_2.1.10) 1) When an OpenTX model file that controls a FrSky stabilized Rx is saved to the PC, are the various...

Has anyone had any experience using the Neuron 60S for a hexacopter? I am considering it for my Tarot T960 build with a Cube Orange autopilot. Does it have desync issues during autotune? What Dshot protocols does it support? The manual says it supports Dshot up to 32 kHz -- does that translate...

Hi all, my first post here. I have added a flaperon line to the ailerons for my 4ch Minimoa 1.4m glider using an 'Offset' to Lower both flaps 10 degrees linked to switch SA. This works nicely, but a bit too crisply. I would prefer it to smoothly lower the ailerons, however, the 'slow' up/down...

I have what I believe to be an early X9D+ (purchased in 2015 from Hobby King). I've never been able to get an external module to work. First with origional FW and later with OpenTX. I always chalked it up to crappy modules (purchased from BangGood etc.), but after having issues with 3...

I am trying to flash the frsky micro receiver with the tx12 transmitter and I am having a lot of trouble. I already have the firmware downloaded onto the transmitter, but I cannot figure out how to flash. I tried following a video where someone used a tx16 but I am getting a warning saying "FW...

As an engineer I have to admit I don't understand branding or marketing. I'd like to understand why FrSky differentiates their product line as they do. My understanding is that FrSky is an electrical and plastics manufacturing house. Early on they where the OEM to firms like Hobby King under...

I had trouble figuring out how to connect my RX via SBUS on my tyro 129 quad rotor kit, but I eventually found the SBUS pad that I needed to solder to. The morning after it was assembled, I noticed that my SBUS pad has completely separated from the flight controller completely. Would it be...

I am expecting a Baudis GP -15 very soon and want redundant Rx. My Tx is aQRx7S. So under consideration are RB 10, 20 and 30. I anticipate a nightmare on the Tx interface with telemetry. Recommendations? Discussion?

In this thread it was asked what was going on with the new family of servos from FrSky. I think they are calling this family of servo Xact. https://forum.alofthobbies.com/index.php?threads/kst-hs-08.1514/post-15164 Well six months ago there was a lot of marketing hype about these. But now I...

One of life's lesson I learned from Watergate was; follow the money. When I bought my X9D+ 2014 there was a note on the sales page to donate some money to OpenTX as it was an open source project and not contracted with FrSky. I was looking to upgrade my OpenTX OS. So I thought it would be...

Hi! we're having a problem connecting/binding frsky R9M to RX8R pro. We are using taranis q x7s. thank you

Hello everyone, I've been following this thread on RCGroups and it has me wondering about the RSSI that I use on my fpv ships. Does anyone know if Frsky's RSSI is simply an indication of power on frequency like the spektrum guy claims or if it is an actual measure of link quality...

Hi! I'm using **FrSKY Taranis X9D Plus with X8R receiver.** After resetting the transmitter, I have completed Stick calibration and configured Fail-safe. I created a model for **Fixed-wing** and bonded X8R successfully. But the problem is that now when I'm using the TX-RX, several times the...

After studying the user manual FR-OS seems to have the functionality of Open-TX. So is it in reality a menu system overlaid on Open-TX with the aim of making Horus appeal to a wider market. If my analysis is wrong can somebody explain the functionality differences between the two.

Here I am shamelessly plugging for FrSky and Aloft Hobbies. The Mirage 2000C-5 has an X8R receiver and a full compliment of FrSky sensors. The Jr radio is using a XJT module driving a FrSky dash board on an LCD arm (not used on this day.) This set up was used to get telemetry on the Jet Fan/ Neu...

Wow, I'm really disappointed with the FrSky! The G-RX8 receiver is NOT ready for the mass market, as of 03/07/2018!!! https://alofthobbies.com/frsky-g-rx8.html I just turned my G-RX8 receiver into a 6 plus 1 channel receiver. Or more to the point "I" just burned up the 7th channel output. The...

Just got around to putting the XSRF4PO Flight controller I ordered a month ago from Aloft on the bench today. It is a very nice controller, but I am not able to use the Blackbox feature. It seems that the SD Card is not being recognized. Usually in the pull down tab of Betaflight (Configurator...

Have you ever used the trainer port on your FrSky radio and had some issues? Maybe it worked great, or maybe it occasionally worked, or worse yet, refused to work. Well, it turns out the issue may be the plug you are using. Seems that these plugs "standard" is a bit out of whack, and differences...