Aloft Forums
Welcome to Aloft Forums. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
accst
-
XJT external module ACCST v2.1.0 and JR don't mix
I had my partner in crime update my XJT to ACCST v2.1.0. Now the recievers, also on their apropreate v2.x.xx firmware will not bind properly to the XJT when the XJT is in the JR TX (8103). I get a bind but no servo movement. But when I bind the XJT and RX using a non-JR TX (X9D+) I get good... -
U
Issues with ACCST range with ACCESS upgraded X10s?
There are several reports that radios with ACCESS enabled modules have significantly reduced ranges in ACCST mode (see, e.g., https://www.rcgroups.com/forums/showpost.php?p=43514033&postcount=14919 and related thread). I will need to purchase a radio for a new drone in our laboratory. Initially...