Aloft Forums

Welcome to Aloft Forums. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

access

  1. M

    GR8 Range check reality check

    Hello! I just upgraded to an X18 from a Futaba 9cap and am looking for some feedback on my setup and range test results. A week ago I was flying the Alpina at 4 corners and got a “Low RSSI” alert while still fairly close in right after partial fly-by - maybe less than 100’ out. Today I did a...
  2. Flying Dutchman

    How or When to use 'RxNum' in a Model Setup?

    I have both ACCESS and ACCST receivers (mostly GR8's), and a single QX7 ACCESS radio. I have never entered a number in the 'RxNum' field on the Model Setup page of any of my models, so they're all at the default '00' value. This has never caused a problem, but I wonder if there is some...
  3. jlummel

    How I Installed Ethos for both the X12S and the X10S with ISRM RF Upgrade Boards

    I'm been using FrSky equipment and OpenTX for a long time, still have an original modified 9X Radio with a DFT module (and telemetry display) that runs what would now be an ancient version of OpenTX. Also also have the original release model of the Taranis (bought here, from Aloft, during the...
  4. O

    Spread spectrum modulation ACCESS

    Inquiring minds want to know. I have been pondering the eSS part of the ACCESS moniker. FrSKY says that it is "elevated spread spectrum". What type of spectrum spreading does FrSKY use? How do multiple transmitters operate with minimal interaction or interference? Are there any features to...
  5. U

    Issues with ACCST range with ACCESS upgraded X10s?

    There are several reports that radios with ACCESS enabled modules have significantly reduced ranges in ACCST mode (see, e.g., https://www.rcgroups.com/forums/showpost.php?p=43514033&postcount=14919 and related thread). I will need to purchase a radio for a new drone in our laboratory. Initially...
Back
Top